BST Drill Stations

Mafell's new BST Drilling Stations offer supreme precision, compared with conventioal drill jigs. The continuously adjustable drill guide, with six vertically located rollers, has an iris-like adjusting mechanism, that encloses around any size bit from 3/8" up to 1 3/16", without any backlash, enables you to achive unprecedented accuracy to 18" deep. The "S" models can be set to +/- 45 degrees and the drill tip, at base plate height, always serves as the pivot axis. All four models have a 43mm diameter (1 11/16") mounting collar behind the chuck for clamping in a drill motor.

BST 650 S Drilling Station - tilts 45 degrees right and left  - 18" drilling depth
The BST 650 S has a drilling depth of 18 " and a maximun drill bit length is 650mm (25 1/2"). It also tilts 45 degrees to the right and left. All the BST's will work with other drill motors that have a 43 mm diameter collar behind the chuck.
$928.00
This BST 650 S with the additional items listed are used for making drilling templates for series drilling and hole patterns.
$1,184.00
The BST 460 S has a drilling depth of 10 3/8" and a maximum drill length of 18". It will also tilt 45 degrees, right and left. All the BST Drill Stations will work with other drill motors that have a 43 mm diameter (1 11/16") collar behind the chuck.
$872.00
The BST 460 S with the additional items listed are used for making drilling templates for series drilling and hole patterns.
$1,134.00
The BST 460 has a cutting depth of 300 mm (11 13/16") maximum drill length of 460 mm (18"). All the the BST drill stations will work with other drill motors that have a 43 mm collar.
$748.00
This BST 460 with the additional items listed are used for making drilling templates for series drilling and hole patterns.
$1,012.00
The BST 320 will take a maximun drill bit length of 12 1/2" and will have a cutting depth of 9". It does not tilt.
$682.00
This BST 320 with the additional items listed are used for making drilling templated for series drilling and hole patterns.
$969.00